Type a tool name, for example "keyword density" or "transcript".
Hours between two times (overnight shifts and breaks included), a weekly timesheet with overtime and pay, adding up hours, and decimal hours.
Your timesheet is saved in this browser only, so it is still here when you come back. Nothing is sent to us.
Type each time as 2:30, 2h 30m, 90m, 45s or 1.5 (a plain number means hours). Pick Subtract to take a time away.
To turn minutes into decimal hours, divide by 60: 45 minutes is 45 / 60 = 0.75 hours. To go back, multiply the decimal part by 60: 0.4 hours is 24 minutes.
| Minutes | Hours |
|---|---|
| 1 | 0.02 |
| 2 | 0.03 |
| 3 | 0.05 |
| 4 | 0.07 |
| 5 | 0.08 |
| 6 | 0.10 |
| 7 | 0.12 |
| 8 | 0.13 |
| 9 | 0.15 |
| 10 | 0.17 |
| 11 | 0.18 |
| 12 | 0.20 |
| 13 | 0.22 |
| 14 | 0.23 |
| 15 | 0.25 |
| Minutes | Hours |
|---|---|
| 16 | 0.27 |
| 17 | 0.28 |
| 18 | 0.30 |
| 19 | 0.32 |
| 20 | 0.33 |
| 21 | 0.35 |
| 22 | 0.37 |
| 23 | 0.38 |
| 24 | 0.40 |
| 25 | 0.42 |
| 26 | 0.43 |
| 27 | 0.45 |
| 28 | 0.47 |
| 29 | 0.48 |
| 30 | 0.50 |
| Minutes | Hours |
|---|---|
| 31 | 0.52 |
| 32 | 0.53 |
| 33 | 0.55 |
| 34 | 0.57 |
| 35 | 0.58 |
| 36 | 0.60 |
| 37 | 0.62 |
| 38 | 0.63 |
| 39 | 0.65 |
| 40 | 0.67 |
| 41 | 0.68 |
| 42 | 0.70 |
| 43 | 0.72 |
| 44 | 0.73 |
| 45 | 0.75 |
| Minutes | Hours |
|---|---|
| 46 | 0.77 |
| 47 | 0.78 |
| 48 | 0.80 |
| 49 | 0.82 |
| 50 | 0.83 |
| 51 | 0.85 |
| 52 | 0.87 |
| 53 | 0.88 |
| 54 | 0.90 |
| 55 | 0.92 |
| 56 | 0.93 |
| 57 | 0.95 |
| 58 | 0.97 |
| 59 | 0.98 |
| 60 | 1.00 |
Rounded to two decimals. The common quarter hours: 15 minutes = 0.25, 30 minutes = 0.50, 45 minutes = 0.75.
Everything is worked out in your browser. Pay is calculated from the exact minutes, then rounded to the cent.
An hours calculator finds how much time passes between a start and an end time, then shows it as hours and minutes, decimal hours and pay. This free one also handles overnight shifts, unpaid breaks, a weekly timesheet with overtime, and adding or subtracting durations, so employees, managers and freelancers can check their hours in seconds.
An hours calculator measures the length of time between two clock times and presents it in a form you can use for payroll, invoices or planning. The basic formula for hours worked is end time minus start time minus any unpaid break.
The same amount of time can be written two ways. Hours and minutes (7:45) is how people read a clock. Decimal hours (7.75) is what most payroll and billing systems multiply by a rate. To convert, divide the minutes by 60: 45 minutes is 0.75 of an hour, and 20 minutes is 0.33.
Pay is decimal hours times your hourly rate. When a shift runs past midnight, the end time looks earlier than the start time on the clock, so the math has to roll into the next day. The calculator does that for you, and it lets you add dates when a span covers more than one day.
The page has four tabs, and each one answers a different question. Follow these steps for the most common jobs.
In Add and subtract, type each amount as 2:30, 2h 30m, 90m, 45s or 1.5. A plain number is read as hours, and you pick Subtract to take a time away.
Suppose you start at 9:00 AM, finish at 5:30 PM, take a 30-minute unpaid break and earn 18.50 an hour. The span from start to end is 8 hours 30 minutes. Subtract the break and you get 8 hours, which is 8.00 in decimal hours. Pay is 8 times 18.50, or 148.00.
An overnight shift works the same way. A start of 10:00 PM and an end of 6:30 AM gives 8 hours 30 minutes, because the calculator treats the earlier end time as the next morning.
In Timesheet, open Pay and overtime, enter an Hourly rate of 20, set Overtime after (hours a week) to 40 and Overtime rate (x) to 1.5. If your week adds up to 45 hours, 40 are paid at 20 (800.00) and 5 at 30 (150.00), so gross pay is 950.00. You can also set Overtime after (hours a day) if your employer or state counts daily overtime.
On Add and subtract, enter 2h 30m, 1:45 and 90m. The total is 345 minutes, which is 5 hours 45 minutes, or 5.75 decimal hours. To find a finishing time instead, use Start from a time of day (find the end time): starting at 9:00 AM and adding 7h 30m lands on 4:30 PM.
Each result appears in the same order: a large total, a decimal line, a timeline, and a table of the pieces. Use the total for reading, the decimal line for payroll or invoices, and the table to check that the break and dates are what you meant.
If your payroll system wants tenths or quarters of an hour, use Round in and out times in the Timesheet. The options run from No rounding to Nearest 30 minutes, including Nearest 6 minutes (0.1 hour) and Nearest 15 minutes (quarter hour). With quarter-hour rounding, a punch at 8:07 becomes 8:00 and a punch at 4:53 becomes 5:00. Apply the same rule your employer uses, or your total will not match your paycheck.
Decimals are rounded only for display, while pay uses the exact time, so a figure like 7.33 hours can differ from 7.3333 by a cent or two when you multiply by hand.
| Minutes | Decimal hours |
|---|---|
| 6 | 0.10 |
| 15 | 0.25 |
| 20 | 0.33 |
| 30 | 0.50 |
| 45 | 0.75 |
A timesheet row that looks wrong is highlighted with a short message. Usually the fix is one of three things: a missing out time, a break longer than the shift, or an AM and PM mix-up. Switching to 24 hour display removes most AM and PM mistakes. If a daylight saving change falls inside a multi-day span, the page adds a note so you can check whether the lost or gained clock hour should be paid.
In the United States, federal law generally requires overtime at one and a half times the regular rate for hours over 40 in a workweek for covered employees. Some states add daily overtime, and employer policies vary, so treat 1.5 and 40 as common starting values and confirm them against your own rules.
The tool suits anyone who needs a reliable time total without building a spreadsheet. These are the situations where it saves the most effort.
If you work in Excel or Google Sheets, remember that times there are fractions of a day. Subtract start from end, then multiply by 24 to get decimal hours. If the cell shows a clock time instead of a number, change its format to Number. A negative result usually means an overnight shift where the end time is earlier than the start. You can use this page to confirm the right answer for one row, then copy the same logic down the sheet.
Most wrong totals come from input habits, not from the math. These checks catch the usual causes.
If a result still surprises you, test the same shift in the Time between tab with a break of 0. Then add the break back and compare. That isolates whether the gap is the span or the break.
The calculator does time arithmetic. It does not know your contract, your state's wage law or your employer's rounding policy, so it cannot tell you what you are legally owed. Overtime and pay figures are gross amounts before tax and other deductions.
Federal rules in the US usually treat bona fide meal periods of 30 minutes or more as unpaid when the worker is fully relieved of duty, and short rest breaks as paid. Your workplace may differ, so enter breaks the way your payroll counts them. If you want to know how long you have been alive in hours, try the age calculator instead, and for the average of several daily totals, the average calculator is the quicker route.
The hours calculator on this page gives you a clear total in hours and minutes, a decimal figure for payroll and an overtime-aware weekly view. Enter your start and end times above, check the breakdown, then copy the result. For more everyday math and conversions, browse the online calculators and utilities hub.
Your report has been submitted. We will look into this issue.
A VPN changes your network exit. It does not guarantee anonymity.
Themes, plugins, code, video, audio, graphics & more from 90,000+ authors.
Web Development
Design & Media
Unlimited Access
Explore Envato Market